8.9
Master
9.2
Master
9.4
Master
9.7
Master
9.8
Ambition
10.0
Ambition
10.2
Hattrick
10.2
Indoor
10.2
Ambition
10.4
Indoor
10.4
HardRope
10.5
Ambition
11.0
Trust
11.4
Trust

10.4 HardRope

A high-performance rope which, due to its construction, materials used and thicker and coarser sheath, has an extremely long lifespan and high abrasion resistance whilst maintaining all advantages of a Dynamic rope – great number of drops, low impact force and very good handling. It is the right choice for frequent use under extreme conditions,for instance in climbing schools or outdoor centres.

rope diameter (mm)10.4
width (mm)71.3
number of UIAA falls min7
number of UIAA falls max9
max. impact force (kN)8.2
sheath slippage (mm)0
static elongation (%)6
dynamic elongation (%)39
knotability1
EN 892yes
CE 1019yes

SINGLE ROPES For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
STANDARD Improved basic finishing of dynamic ropes. The new technological process enables to apply impregnation agents as early as the standard finishing of ropes is done. The result is an excellent water resistance and abrasion resistance as well as extended lifespan of TENDON ropes.
PROTECT SHIELD In addition to the standard finishing against water and abrasion, the sheath of the entire product is treated with the TENDON NANOTECHNOLOGY surface finish. Using the new progressive method of surface finishing called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath and very effectively prevents penetration of water, dust and other particles into the rope sheath in which way the water resistance and the abrasion resistance of the ropes are increased.
COMPLETE SHIELD The maximum level of protection of ropes with high water resistance and abrasion resistance. Using the new progressive method called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath as well as the rope core and forms an almost impermeable protective layer against water and dust that could damage the sheath or the core. COMPLETE SHIELD is a new impregnation which extends the general lifespan of TENDON ropes significantly.
COMPACT – COMPACT ENDING Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
MIDPOINT OF ROPE - CENTRE MARKETING At half of the length, the rope is visibly marked by colour, which does not interrupt the core structure and its mechanical properties. Lengths 30 - 80 m only.
CE - SYMBOL OF COMPLIANCE The CE symbol on a product declares that the product is in compliance with all applicable regulations and has undergone all appropriate compliance evaluation procedures. The number after the CE symbol (e.g. 0408) indicates relevant accredited laboratory.
UIAA Products marked with this symbol meet UIAA requirements. The UIAA is the International Mountaineering and Climbing Federation.

close Certificates for this product Certificates on request

Ask to your facebook´s friends