9.2 Master

The specialist of our range. Low weight and narrow diameter suit this rope to top-end sport climbing. Choose this rope for extreme on-sights and red-points where every gram saved and drag reduction are crucial to success.

rope diameter (mm)9.2
weight (g/m)53
number of UIAA falls min5
number of UIAA falls max6
max. impact force (kN)6.8
sheath slippage (mm)0
static elongation (%)9
dynamic elongation (%)35
knotability0.8
EN 892yes
CE 1019yes

SINGLE ROPES For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
STANDARD Improved basic finishing of dynamic ropes. The new technological process enables to apply impregnation agents as early as the standard finishing of ropes is done. The result is an excellent water resistance and abrasion resistance as well as extended lifespan of TENDON ropes.
PROTECT SHIELD In addition to the standard finishing against water and abrasion, the sheath of the entire product is treated with the TENDON NANOTECHNOLOGY surface finish. Using the new progressive method of surface finishing called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath and very effectively prevents penetration of water, dust and other particles into the rope sheath in which way the water resistance and the abrasion resistance of the ropes are increased.
COMPLETE SHIELD The maximum level of protection of ropes with high water resistance and abrasion resistance. Using the new progressive method called NANOTECHNOLOGY, TEFLON® in form of very small particles is applied to the rope sheath as well as the rope core and forms an almost impermeable protective layer against water and dust that could damage the sheath or the core. COMPLETE SHIELD is a new impregnation which extends the general lifespan of TENDON ropes significantly.
COMPACT – COMPACT ENDING Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
MIDPOINT OF ROPE - CENTRE MARKETING At half of the length, the rope is visibly marked by colour, which does not interrupt the core structure and its mechanical properties. Lengths 30 - 80 m only.
CE - SYMBOL OF COMPLIANCE The CE symbol on a product declares that the product is in compliance with all applicable regulations and has undergone all appropriate compliance evaluation procedures. The number after the CE symbol (e.g. 0408) indicates relevant accredited laboratory.
UIAA Products marked with this symbol meet UIAA requirements. The UIAA is the International Mountaineering and Climbing Federation.

close Certificates for this product Certificates on request

Ask to your facebook´s friends