If you want to have a lightweight rope for sport climbing and if you would like to use it occasionally in the mountains also, Master 9.0 is a good choice. In addition, this rope makes use of the TeFIX® technology which increases resistance and prolongs the lifespan of the rope thanks to the connection of the core and the sheath.
TENDON Master 9.0 TeFIX - růžová
For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
At half of the length, the rope is visibly marked by coloured band, which does not affect the core structure and its mechanical properties. Lengths 30 - 80 m only.
The TeFIX® patented technology permanently bonds the sheath to the core. It prevents from any slippage between these two basic rope parts. This particular feature was reached by adding a special material between core and sheath. This extra material is later also processed so that the bond is flexible and strong. The rope has a 0% sheath slippage, much longer lifespan, and better handling.
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.
New, revolutionary conception of the overall administration and registration of ropes which, thanks to NFC technology, offers unthought-of possibilities and brings user comfort to a hitherto unrecognized level. Rope includes microchip. With a PC and a mobile phone you obtain a quick, effective and smart tool for examination and maintenance of your ropes.