Master Pro 7.6 is a unique rope on the world market. It achieved 11 certified falls when used as a "half rope" and even 28 falls when used as a "double rope". Only a little less unique is its weight of 38 grams per meter. Simple braiding reduces the susceptibility of the rope to abrasion and thus extends its service life.
- Home
- Products
- Dynamic ropes
- Mountaineering
- TENDON Master PRO 7.6 - orange
TENDON Master PRO 7.6 - orange
Code: D076TP42C000C
TeNOTE
online tool designed for revising and tracking the condition of ropes. The application is available in Google Play or available on the Web interface. To register use TeNOTE code on the product packaging.
online tool designed for revising and tracking the condition of ropes. The application is available in Google Play or available on the Web interface. To register use TeNOTE code on the product packaging.
Half ropes
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
Twin ropes
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
Complete Shield
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
SBS - Simple Braid System
SBS – is system where each strand is plaited separatelly into the sheath construction and not in pair (tandem). SBS braiding makes the sheath surface much more compact and smoother. Therefore ropes made by SBS generate much lower friction, are more resistant to abrasion and last longer while in contact with rocks.
SBS – is system where each strand is plaited separatelly into the sheath construction and not in pair (tandem). SBS braiding makes the sheath surface much more compact and smoother. Therefore ropes made by SBS generate much lower friction, are more resistant to abrasion and last longer while in contact with rocks.
Compact
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
CE - symbol of compliance
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
UIAA
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.