An new version of a robust rope AMBITION 10.2 enriched with TeFIX® technology. The fact that the core is connected with the sheath prevents the sheath from shifting and provides maximum possible safety in case of the sheath damage. An ideal rope which will guide you through many vertical miles.
TENDON Ambition 10.2 TeFIX - Yellow
For ascent where only one rope is used. This is the most basic and widely used method of using rope for ascents.
online tool designed for revising and tracking the condition of ropes. The application is available in Google Play or available on the Web interface. To register use TeNOTE code on the product packaging.
Improved basic finishing of dynamic ropes. The new technological process enables the application of impregnation agents early in the standard finishing of the ropes.
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
At half of the length, the rope is visibly marked by coloured band, which does not affect the core structure and its mechanical properties. Lengths 30 - 80 m only.
The TeFIX® patented technology permanently bonds the sheath to the core. It prevents from any slippage between these two basic rope parts. This particular feature was reached by adding a special material between core and sheath. This extra material is later also processed so that the bond is flexible and strong. The rope has a 0% sheath slippage, much longer lifespan, and better handling.
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.