Master PRO 7.6 mm is the first simple braided half and double rope, whose parameters are virtually unbeatable by any other rope in this cathegory. Master PRO 7.6 mm is the only rope with diameter of less than 8 mm in the market which has a large number of UIAA falls (11 falls as a half rope, 28 falls as a double rope) and very low impact force at the same time. With the weight of 38 g/m and 7.6 mm diameter the rope is suitable for all kinds of climbers.
TENDON Master PRO 7.6 - Green
Separate ropes are anchored in alternating belaying points. This system reduces the risk of rope breakage by falling rocks and provides maximum protection in alpine conditions or on tough climbs.
The same ropes are always used in pairs, secured at common belaying points. Twin ropes guarantee a high level of safety, especially for classic alpine climbing.
Maximum level of rope protection against water and abrasion. It is reached by using the new progressive NANOTECHNOLOGY method. Tiny particles of TEFLON®Eco are applied to the rope sheath and core and make a film of almost impermeable protective layer. The rope fibres are then protected against dust and water which would othervise cause a harm to the rope construction. COMPLETE SHIELD is an impregnation which extends the general lifespan of TENDON ropes significantly. All ropes with the Complete Shield finish meet the UIAA 101 requirement for water repellent test.
SBS – is system where each strand is plaited separatelly into the sheath construction and not in pair (tandem). SBS braiding makes the sheath surface much more compact and smoother. Therefore ropes made by SBS generate much lower friction, are more resistant to abrasion and last longer while in contact with rocks.
Our own special technology has been used for the ends of the rope. In a length of 15 mm, the core strand and sheath are connected into one unit.
This symbol confirms that the product meets safety requirements specified in the relevant Europen regulations. The number following symbol (e.g. CE1019) is number of notified body which performs checking of production: VVUÚ, a.s., Pikartská 1337/7, 71607 Ostrava- Radvanice, Czech Republic.
Products marked with this symbol meet UIAA requirements.The UIAA is the International Mountaineering and Climbing Federation.
New, revolutionary conception of the overall administration and registration of ropes which, thanks to NFC technology, offers unthought-of possibilities and brings user comfort to a hitherto unrecognized level. Rope includes microchip. With a PC and a mobile phone you obtain a quick, effective and smart tool for examination and maintenance of your ropes.